WHO WE ARE ?

We started in 2014 in Vietnam. The company started small, serving a few local businesses. Since then, we have served over 10,000+ local and national clients. Our Goal is to give the best for the less. So we came up with the solution! We have over 300 experts who specialize in Web Development, Digital Marketing and Social Media and we have no middleman so we can pass the savings to you. You name it we do it! SEO! PPC! IT Support! Web Development! Ecommerce!

We make business better by delivering reliable digital solutions

0.5 Cutting Diameter HSS 4 Flutes Long Reach 30 Deg Helix Square Nose End Mill 4 Overall Length YG-1 E9A87 High Speed Steel Weldon Shank Bright Roughing Cut Finish 0.5 Shank Diameter Uncoated

YG-1 E9A87 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 4 Flutes, 4' Overall Length, 0.5' Cutting Diameter, 0.5' Shank Diameter: Industrial & Scientific. YG-1 E9A87 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter: Industrial & Scientific. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills 。 Coarse-pitch tooth design and tool geometry are suitable for high-production machining on a range of strong materials, including structural steel, carbon steel, alloy steel, tool steel, prehardened steel, and cast iron 。 Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills 。 Powdered-metal high-speed steel is tougher and more shock resistant than conventional high-speed steel and cobalt steel 。 Number of flutes varies by diameter for optimum feed and cut rate 。 The E9A8 uncoated powdered-metal high-speed steel long-length roughing square nose end mill has a coarse pitch, multiple flutes, and a 30-degree helix angle for high-production metal removal on a range of strong materials, including structural steel, carbon steel, alloy steel, tool steel, prehardened steel, and cast iron. The end mill has chip-breaking cutting edges that create small chips for heavy cuts and remove material in less time than conventional end mills, with minimal vibration (chatter). It produces a rough finish that can be smoothed by a second finishing cut. Long-length end mills have longer cutting edges than standard-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) The number of flutes varies by diameter to optimize the feed and cut rate. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose roughing applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. 。 Powdered-metal high-speed steel is tougher and more shock resistant than conventional high-speed steel and cobalt steel for higher productivity. With no coating or surface treatment, this uncoated tool can be used on a range of materials. Cutting diameter tolerance is + 0.0030 to - 0.0000". This tool has a Weldon shank. 。 End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. 。 manufactures and sells drills, taps, end mills, spade drills, and rotary tooling. The company was founded in 1981. maintains its headquarters in Vernon Hills, IL. 。 。 。 。 。

0.5 Cutting Diameter HSS 4 Flutes Long Reach 30 Deg Helix Square Nose End Mill 4 Overall Length YG-1 E9A87 High Speed Steel Weldon Shank Bright Roughing Cut Finish 0.5 Shank Diameter Uncoated

0.5 Cutting Diameter HSS 4 Flutes Long Reach 30 Deg Helix Square Nose End Mill 4 Overall Length YG-1 E9A87 High Speed Steel Weldon Shank Bright Roughing Cut Finish 0.5 Shank Diameter Uncoated
0.5 Cutting Diameter HSS 4 Flutes Long Reach 30 Deg Helix Square Nose End Mill 4 Overall Length YG-1 E9A87 High Speed Steel Weldon Shank Bright Roughing Cut Finish 0.5 Shank Diameter Uncoated
0.5 Cutting Diameter HSS 4 Flutes Long Reach 30 Deg Helix Square Nose End Mill 4 Overall Length YG-1 E9A87 High Speed Steel Weldon Shank Bright Roughing Cut Finish 0.5 Shank Diameter Uncoated
0.5 Cutting Diameter HSS 4 Flutes Long Reach 30 Deg Helix Square Nose End Mill 4 Overall Length YG-1 E9A87 High Speed Steel Weldon Shank Bright Roughing Cut Finish 0.5 Shank Diameter Uncoated

CLIENTS I’VE WORKED WITH