WHO WE ARE ?

We started in 2014 in Vietnam. The company started small, serving a few local businesses. Since then, we have served over 10,000+ local and national clients. Our Goal is to give the best for the less. So we came up with the solution! We have over 300 experts who specialize in Web Development, Digital Marketing and Social Media and we have no middleman so we can pass the savings to you. You name it we do it! SEO! PPC! IT Support! Web Development! Ecommerce!

We make business better by delivering reliable digital solutions

316 Stainless Steel Eyebolt Threads Imported 4 Length Not For Lifting

316 Stainless Steel Eyebolt, Not For Lifting, 4' Length, Threads, Imported: Eyebolts And Eyescrews: Industrial & Scientific. 316 Stainless Steel Eyebolt, Not For Lifting, 4" Length, Threads, Imported: Eyebolts And Eyescrews: Industrial & Scientific. Stainless steel 316 shoulder eyebolts 。 Furnished with standard hex nuts 。 3440 pounds working load limit 。 2-inches thread length 。 Shank measures 5/8-inches diameter by 4-inches length 。 drop forged stainless steel shoulder eyebolt furnished with standard hex nuts. Rated capacity is drastically reduced when loading at any angle. Loading must never be made at an angle greater than 5 degree from bolt centerline. At any angle of 5 degree, rated capacity is reduced to / of the tabulated value. Loads should always be applied to lifting eyes in the plane of the eye, not at some angle to this plane. Shoulder lifting eyes must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating. Working load limit is based on a design factor of 5:. 0 pounds working load limit. 2-inches thread length. Shank measures 5/-inches diameter by -inches length. 。 。 。

316 Stainless Steel Eyebolt Threads Imported 4 Length Not For Lifting

316 Stainless Steel Eyebolt Threads Imported 4 Length Not For Lifting
316 Stainless Steel Eyebolt Threads Imported 4 Length Not For Lifting

CLIENTS I’VE WORKED WITH